Ceiling system - メーカー・企業と製品の一覧

Ceiling systemの製品一覧

1~3 件を表示 / 全 3 件

表示件数

INNOSOL Ceiling system

After installing the rail on the wall or ceiling, construction will be carried out using the tensile strength of a specially processed sheet!

The "INNOSOL Ceiling system" is a system that is constructed using the tensile strength of specially processed sheets (membranes) after installing rails on walls or ceilings. The sheets can be attached and detached from the fixed rails, allowing for opening and closing. Additionally, by using translucent sheets and installing lighting (LED or fluorescent) on the inside, a soft lighting diffusion effect can be achieved. This system can be used to create space designs tailored to the needs of large facilities, business spaces, and general residences. 【Features】 ■ The sheets can be attached and detached from the fixed rails, allowing for opening and closing. ■ By using translucent sheets and installing lighting on the inside, a soft lighting diffusion effect can be achieved. ■ Space designs tailored to the needs of large facilities, business spaces, and general residences can be constructed. *For more details, please refer to the related links or feel free to contact us.

  • Interior wall decoration
  • Other interior and exterior systems and units
  • Other lighting fixtures

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ceiling System "Aluminum Mesh SZ"

Less than 2.0 kg per square meter! By using aluminum for the main materials, we have significantly improved lightweight properties.

The "Aluminum Mesh SZ" is a mesh ceiling system that boasts a lightweight class with a unit area mass of 2.0 kg/m² or less. It uses lightweight mesh panels weighing approximately 0.8 kg per panel. By using aluminum for the main components, we have significantly improved the lightweight characteristics. This specification combines a bottom joint type joiner with mesh panels that have a cell pitch of approximately 145 mm, allowing for compatibility with our lightweight ceiling products. 【Features】 ■ Uses lightweight mesh panels weighing approximately 0.8 kg per panel ■ Lightweight class with a unit area mass of 2.0 kg/m² or less ■ Compatible with our lightweight ceiling products ■ Significant improvement in lightweight characteristics by using aluminum for the main components ■ Specification that combines a joiner with mesh panels having a cell pitch of approximately 145 mm *For more details, please refer to the PDF document or feel free to contact us.

  • System ceiling
  • Spandrel Aluminum Panel

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

FS Ceiling System

The ceiling height can be freely constructed! It can be used with peace of mind in various facilities.

We would like to introduce our "FS Ceiling System." It can be installed outdoors as long as it is in a location not affected by ultraviolet rays. A 2-meter wide roll sheet is joined together in the factory using a special welding technique to create a single sheet of approximately 15 meters wide. Additionally, the PDF document introduces this system in a Q&A format. We encourage you to read it. 【Features】 ■ Made of fiberglass, so it does not stretch even with temperature changes ■ Non-combustible certified material (NM-0545) ■ Essentially a tensioned structure that does not sag, requiring no re-tensioning ■ The expected lifespan of the sheet itself is over 30 years ■ It is possible to install lighting fixtures and inspection openings using the substrate *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration isolation, vibration control, and earthquake resistance construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録